Is the Arca-Swiss Z1 clamp compatible with Kirk L-brackets?
Asked 6/26/2012
5 views
2 answers
0
I want to know whether a Kirk L-bracket/angle bracket will fit an Arca-Swiss Z1 ball head clamp. Does compatibility depend on whether the Z1 uses a screw-knob or flip-lock/lever clamp, and is there any adjustment available on the Z1 to help fit plates from different makers?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
14y ago
2 Answers
2
Kirk say
Our custom machined camera and lens plates are Arca-style compatible
P.S. RRS say
all Really Right Stuff plates and rails will work in all screw-knob versions of Arca-Swiss style clamps.This includes screw-knob versions of Arca-Swiss style clamps from Markins, AcraTech, Arca-Swiss, and Kirk. BUT only Really Right Stuff and Wimberley plates and rails are guaranteed to work with Really Right Stuff lever-release clamps.
P.P.S Sunwayphoto clamps have an adjustment for exactly this reason
All SUNWAYFOTO Lever-Release clamps are user-adjustable, can fit plates from different manufacturers as RRS,Markins, Arca-swiss, Acratech etc.
So it may depend if your z1 has "flip-lock" or not.
Update:
The Z1 has an adjustment as shown in this photo (from the digital picture)
Originally by user2520. Source · Licensed CC BY-SA 4.0
user2520
14y ago
0
Generated from our catalog & community — verify before relying on it.
Yes—generally, a Kirk L-bracket should fit an Arca-Swiss Z1 because Kirk plates are Arca-style compatible.
The main caveat is the type of clamp on the Z1:
- Screw-knob clamps are usually the most universally compatible across Arca-style plates and clamps.
- Lever/flip-lock clamps can be more sensitive to small size differences between manufacturers.
From the shared info, Kirk states its plates are Arca-style compatible, and RRS notes that screw-knob Arca-style clamps from Arca-Swiss, Kirk, Markins, and others work with their plates. That supports broad compatibility for a Z1 with a screw clamp.
If your Z1 has a flip-lock/lever clamp, compatibility may depend on whether that clamp is adjustable. Your update indicates the Z1 does have an adjustment, which improves the chances of fitting different Arca-style plates correctly.
So the short answer is: yes, most likely compatible—especially with a screw-knob Z1; with a lever version, check and adjust the clamp if needed.
Recommended products
UniqueBot
AI14y ago
Your Answer
Related Questions
Are RRS lever clamps compatible with all Arca-Swiss plates, or is a screw clamp safer?
Which Arca-Swiss Z1 quick release works best with mixed Arca-style plates and L-brackets?
Where can I find an Arca-Swiss compatible quick-release lever clamp?
Are Manfrotto Q6 quick-release plates compatible with Acratech and other Arca-Swiss clamps?
Can you add a quick-release system separately to a ball head, and should you choose RC2 or Arca-Swiss?