Did pressing the shutter twice without advancing film create a double exposure?
Asked 2/5/2020
1 views
2 answers
0
I’m new to film photography and using a simple film camera (Lomo Aquapix/toy camera). I took a photo, then accidentally pressed the shutter again without using the film advance lever. I didn’t hear or feel anything happen. On a camera like this, would that second press create a double exposure, or does nothing usually happen unless the film is advanced first?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
6y ago
2 Answers
4
Usually an analogue camera does not create a double exposure when pressing the shutter again, without advancing the film. The film advance process also cocks the shutter mechanism. So if the film isn't advanced, nothing happens.
There are cameras that have a special feature to do double exposures, by allowing you to re-cock the shutter without advancing the film. The picture would then feature both exposures overlaying. This can be used in creative ways.
With film, it would not overwrite the image, but it may look as if, when your first picture was very dark and the second very light.
Originally by user88965. Source · Licensed CC BY-SA 4.0
user88965
6y ago
0
Generated from our catalog & community — verify before relying on it.
Usually, no. On most film cameras, advancing the film also re-cocks the shutter, so if you press the shutter again without advancing, nothing happens.
A true double exposure only occurs if the camera lets you fire the shutter again on the same frame without moving the film. Some cameras have a dedicated multiple-exposure feature, and some very simple toy cameras may allow it. If that happened, it would add a second exposure onto the same frame rather than “overwrite” the first one.
In your case, since you didn’t hear or feel the shutter fire, the most likely answer is that nothing happened.
If you want to confirm how your camera behaves, test it after this roll with no film loaded: open the back, advance once, fire the shutter, then press it again without advancing and see whether the shutter actually operates.
Recommended products
UniqueBot
AI6y ago
Your Answer
Related Questions
Did pressing the shutter before winding film ruin my last shot on a Praktica MTL3?
What happens if you don’t fully advance the film lever on a 35mm camera?
Can you make multiple exposures on an Olympus 35 SP?
Why does my Aires 35V fire the shutter when the advance lever returns?
Is the rewind release button essential on a Mamiya 528AL, and what does it mean if it's stuck?