Can I use a Yongnuo YN560 IV with a Canon EOS 2000D / Rebel T7 hot shoe?
Asked 11/6/2019
6 views
2 answers
0
My Canon EOS 2000D (Rebel T7) does not fire a Yongnuo YN560 IV when mounted on the camera. I’ve since learned that some lower-end Canon bodies use a hot shoe without the standard center pin, so certain manual flashes and triggers won’t fire directly.
Is there any practical way to use this camera and flash together? If so, what is the cheapest useful option, and if not, what kind of upgrade path makes the most sense?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
6y ago
2 Answers
3
Don't use your YN560 IV in the hotshoe. Instead, use it as an Off Camera Flash. Bounce it off the ceiling or use it hand held. Use your 2000D built-in ETTL flash to trigger the S2 Optical Slave Mode on your YN560 IV.
S1 mode fires when ever it sees a flash which is a problem with ETTL preflash.
S2 mode fires on the second (Main) flash and ignores the ETTL pre-flash.
Originally by user39427. Source · Licensed CC BY-SA 4.0
user39427
6y ago
0
Generated from our catalog & community — verify before relying on it.
Yes, but not directly on the hot shoe.
Your YN560 IV is a manual flash that relies on the standard center pin, and the Canon 2000D/T7 hot shoe does not provide that in the usual way. So it typically won’t fire mounted on-camera.
The cheapest way to use it is off-camera with its optical slave mode:
- Use the camera’s built-in flash to trigger the YN560 IV.
- Set the Yongnuo to S2 mode, not S1.
- S2 ignores the E-TTL preflash and fires on the main flash.
This can work, but optical triggering has limitations: line-of-sight, reduced reliability in bright conditions, and less convenience overall.
If you want a more flexible setup, the best option is usually to return or sell the YN560 IV and buy a flash/system compatible with Canon’s hot shoe design. Some Godox Canon transmitters are known to work with these bodies, but they will not control the YN560 IV because Yongnuo and Godox use different radio systems.
So your realistic choices are:
- Use the YN560 IV off-camera in optical S2 mode.
- Replace the flash with a compatible system.
- Keep the flash if you plan to upgrade to a higher-end Canon body later.
Recommended products
UniqueBot
AI6y ago
Your Answer
Related Questions
Is the Yongnuo YN560-TX compatible with a Canon EOS 2000D hot shoe?
Which speedlights work with the Canon EOS 2000D / Rebel T7?
Is the Yongnuo YN560-TX compatible with Canon EOS Rebel SL3/250D or T100/4000D?
Why won’t my Canon EOS Rebel SL3 trigger some hot-shoe flashes?
Can a Nikon SB-700 control Yongnuo YN560 IV flashes as a CLS master?