- For slip-free and accurate movement
- 0.8 mod (cine pitch) drive gear
- Mounts directly on to standard 15mm rods
- Compatible with many rigs on the market
- Magnetic and keyed marking ring included

• Control Angle Accuracy: ±0.002°
• Brushless Motor and Receiver in One Unit
• Up to 330' Line-of-Sight Range
• Adjustable Endpoints
• Works with Ronin and Ronin-M
• Works with Zenmuse X5 or X5R Cameras
• Fits Standard 15mm and 19mm Rods
• Built-In Rosette Mount
• Dimensions: 3.5 x 2 x 1 in. (90 x 50 x 26 mm)
• Weight: 6 oz. (170 g)

• Matches Still Lenses to 0.8 Gear Wheels
• Four Sizes Included: 90 / 80 / 70 / 60mm

• Attaches to Standard 15mm Rods via Clamp
• Focus-Adjusting Rubber Friction Wheel
• Focus-Adjusting .8 Pitch Gear Wheel
• Can Be Used on Either Side of a Lens

• FF Adjusts Horizontally & Vertically
• Friction & 0.8-Pitch Geared Wheels
• Base Adds 2" to Camera Height
• Includes Pair of 8" 15mm Rods

• Used with cine lenses and lens gears
• Compatible with Lens Gear Kit (0.8 Pitch)
• Included with Follow Focus Friction and Gear Clic (FFCLIC) Follow Focus
• Constructed from aluminum for durability

• Place Markings for Pulling Focus
• Suitable for Dry Erase Markers
• For Friction/Clic Follow Focus

• Place Markings for Pulling Focus
• Use with Dry Erase Markers
• Replacement or Additional Marking Disc

• Snap-On 15mm Rod Attachment
• Adjustable Gear Arm
• Two 0.8 Pitch Gears: 28 Teeth & 43 Teeth
• Adjustable Hard Stops

• For Dual-Sided Focus Control
• Adjustable Hard Stops
• Removable Marking Disc
• Industry Standard Accessory Port

• Dual-Sided Focus Control
• Snap-On 15mm Rod Attachment
• Adjustable Gear Arm
• Two 0.8 Pitch Gears: 28 Teeth & 43 Teeth

• 0.8 Pitch Gear with 28 Teeth
• Aluminum Construction

• 0.8 Pitch Gear with 43 Teeth
• Aluminum Construction

• For Sony Alpha a7S III camera
• Wooden Push-Button Top Handle compatible with audio unit
• Push, adjust, release, and then its locked
• SHAPE kit focus single rod follow focus 15 mm LWs
• 2-Stage 4 x 5.6″ matte box
• Formfitting Design cage with multiple mounting options
• Strap hooks can remain attached to the camera while inserted in the cage
• Quick Release Rod Base System
• 1 pair of 10” 15 mm Rods
• Metabones Adapter Support Bracket

• For Sony Alpha a7S III camera
• Wooden Push-Button Top Handle compatible with audio unit
• Quick Handle Rod Bloc with Push-button
• Push, adjust, release, and then its locked
• Mini Composite shoulder pad & back Pad
• SHAPE kit focus single rod follow focus 15 mm LWs
• 2-Stage 4 x 5.6″ matte box
• Formfitting Design cage with multiple mounting options
• Strap hooks can remain attached to the camera while inserted in the cage
• Quick Release Rod Base System
• 1 pair of 18” 15 mm Rods
• Metabones Adapter Support Bracket

• Recommended as Zoom Solution for Crane
• Recommended as Sole Solution for WEEBILL
• Enables focus/zoom control on the camera
• Compatible with a variety of commonly used lenses
• Camera controls on the stabilizer will not be affected
• Controlled via Gimbal Handwheel or App
• USB Cable Connection to Gimbal
• Toolless Attachment with Thumbscrews
• Zero-Latency Control

• Mounts on 15mm Rod, 2 x Hard Stops
• 0.8 MOD Gear, Removable Marking Disk
• Precision Fluid Dampening Control
• Hard-Shell Case Included