Rode NTG4+ Shotgun Mic w/Digital Switches and Built-In Rechargeable Battery

Broadcast sound quality
Low noise circuitry
Condenser transducer
Rugged metal construction
Internal rechargeable lithium battery
Fully charged in under 2 hours via MicroUSB
High Frequency Boost
Convenient digital switching
High Pass Filter (0Hz/75Hz)
PAD (-10db)
Designed and manufactured in Australia

Color:: Black

Color:: The color of the item.

Overview

The Rode NTG4+ Shotgun Mic w/Digital Switches and Built-In Rechargeable Battery NTG-4+ is based on the successful NTG1 and NTG2 microphones, but with an updated condenser capsule that delivers broadcast quality sound. Designed to be mounted on a boom or atop a camera, this microphone features a super-cardioid directional pickup pattern with a frequency range of 20 to 20,000 Hz. The intuitive digital switch controls the inbuilt high-pass filter pad and high-frequency boost. The convenient switch is located on the body of the microphone, and it even retains your settings when the microphone is turned off. It also features an internal, rechargeable, lithium battery that can be charged via USB.

Product Reviews

There are no reviews for this product.

Write a review

Specifications

Brand
Rode

Microphone Specifications
Polar Pattern:	Super-Cardioid

Detailed Specifications
Type of Microphone:	Shotgun Microphone
Type of Microphone: Type or brand of microphone used to capture audio. View All Attribute Definitions
Sensitivity:	-32dB re 1V/Pa (25mV @94db SPL) ±2dB @ 1kHz
Sensitivity: Sensitivity or ISO refers to the light sensitivity of a certain film or a digital sensor. Where a film usually has a suggested ISO, a digital sensor often has a range of light sensitivity. View All Attribute Definitions
Impedance:	Output Impedance: 200 ohm
Impedance: The the ratio of the voltage phasor to the electric current phasor, a measure of the opposition to time-varying electric current in an electric circuit. View All Attribute Definitions
Signal-to-Noise Ratio:	78dB SPL (per IEC651)
Signal-to-Noise Ratio: The signal to noise ratio (SNR) is a useful and universal way of comparing the relative amounts of signal and noise for any electronic system; high ratios will have very little visible noise whereas the opposite is true for low ratios. View All Attribute Definitions
Power Requirements:	48V Phantom Power (4.8mA current draw) or internal rechargeable lithium battery
Power Requirements: This is the battery or adapter necessary to power a device. View All Attribute Definitions
Connectors:	Output Connection: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
Connectors: These are audio or video cables used to connect a camera or videocamera to another source. View All Attribute Definitions
Frequency Range:	20Hz ~ 20,000Hz (selectable HPF @ 75Hz)
Frequency Range: This is the approximate frequency range that wireless device can operate on. View All Attribute Definitions

Physical Specifications
Dimensions:	(W x H x D) 22 x 278 x 22 mm
Dimensions: The measurements of an object. View All Attribute Definitions
Weight:	176 g
Weight: The physical weight of the item without packaging. View All Attribute Definitions
Color:	Black
Color: The color of the item. View All Attribute Definitions

Power System
Battery Type:	Internal rechargeable lithium battery
Battery Type: The type of battery for a device. Some cameras use single use alkaline while others use rechargeable lithium batteries. View All Attribute Definitions