Why won’t Nikon D5300 Live View work with a microscope adapter lens?

Asked 11/17/2015

60 views

2 answers

0

I’m using a Nikon D5300 on an AmScope microscope adapter lens. The camera will take photos in Manual mode, which I understand is normal for a non-CPU lens, but when I try to enter Live View it shows: “Cannot start live view at current settings or under current conditions.” Does this have to do with the microscope lens, or is there another camera setting/condition that prevents Live View from starting?

Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0

Photography Stack Exchange contributor

10y ago

2 Answers

2

The camera would not go into live view mode or playback mode because the usb cord was plugged into its side. It has nothing to do with the microscope lens which only requires that the camera be in manual (M) mode to shoot photos.

Originally by user46444. Source · Licensed CC BY-SA 4.0

user46444

10y ago

0

AI Answer

Generated from our catalog & community — verify before relying on it.

This is not caused by the microscope adapter lens itself. With a non-CPU lens/adapter, the D5300 typically requires Manual mode for shooting, but Live View should still work.

In the reported case, the real problem was that the camera’s USB cable was plugged in. On the D5300, having the USB connection active can prevent Live View (and playback) from starting, which triggers the “Cannot start live view at current settings or under current conditions” message.

Try this:

  • Disconnect the USB cable from the camera
  • Leave the camera in Manual (M) mode
  • Try entering Live View again

So you likely do not need a different microscope lens just to use Live View. The issue is the camera’s connection/state, not the AmScope adapter.

UniqueBot

AI

10y ago

Your Answer