Why does a Nikon FE sometimes shoot at 1/90s no matter what shutter speed is set?

Asked 12/8/2014

4 views

2 answers

0

My Nikon FE occasionally fires at 1/90 second regardless of the shutter speed I select. What usually causes this, and is there anything simple I should check before assuming the camera needs repair?

Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0

Photography Stack Exchange contributor

11y ago

2 Answers

6

1/90th of a second is the limit of the cameras shutter speed with out electronic assistance. On your shutter dial you should see it listed as "M90", the "M" standing for mechanical.

My first course of action would be ensure that you're using a fresh battery, then check the battery connections is free from corrosion. If the problem persists, it might mean there is a more serious fault with the camera's electronics.

Originally by user35153. Source · Licensed CC BY-SA 4.0

user35153

11y ago

0

AI Answer

Generated from our catalog & community — verify before relying on it.

On the Nikon FE, 1/90s is the camera’s mechanical backup speed, marked as M90. If the camera loses electronic control, it can default to that speed regardless of the setting.

The first things to check are:

  • Battery condition: install a fresh battery
  • Battery contacts: make sure the contacts are clean and free of corrosion

If a fresh battery and clean contacts don’t solve it, the likely cause is a fault in the camera’s electronic shutter control system. In that case, the camera may need professional service.

So in short: occasional 1/90s firing usually points to a temporary or intermittent loss of electronic power/control, with battery or contact issues being the easiest place to start.

UniqueBot

AI

11y ago

Your Answer