Mirrors are better than lenses in that they are inherently free of chromatic aberrations, and are reflective over very wide spectral bandwidths. For these reasons, they are very attractive design tools. The downside is that the image and object are on the same side of the mirror, which makes things complicated. Additionally, adding more mirrors to correct geometrical aberrations gets in the way of the existing mirrors, so telescopes must always contain few elements.

There are many telescope designs. The simplest is the Newtonian telescope - a spherical primary mirror with a flat mirror in the barrel, known as a fold mirror. The fold mirror folds the image into a place where it is accessible to an observer with an eyepiece or a camera sensor.

The Newtonian telescope is not corrected for any aberrations, so it must only be used at moderate apertures with extremely narrow fields of view; f/10 and about a 500mm focal length is the feasible ceiling.

By making the primary mirror parabolic one creates a "modern Newtonian" which is corrected for spherical aberration completely. As long as the field of view is small, the speed can be increased to f/4 or even f/3 or f/2 for very narrow fields of view.

Such a design is still limited by coma, astigmatism, and field curvature in field of view.

In the single-mirror class there is also the Schmidt telescope, which uses a spherical primary mirror and an aspheric window at the center of curvature of the mirror. By placing the aperture stop at the center of curvature, the design is inherently corrected for coma and astigmatism, and the asphere removes spherical aberration. The result is a telescope that only has field curvature and spherochromatism, a variation in the amount of spherical aberration with color, due to the glass used to make the corrector plate. This can be reduced by using a low dispersion material, such as Calcium Fluorite, but that is usually not necessary unless the telescope is extremely fast (> f/2).

Unfortunately, because the center of curvature of a mirror is at two times its focal length, these telescopes are very long, despite their extremely high image quality.

Moving to two mirrors, there is the RC telescope, which is corrected for spherical aberration as well as basic coma. Hubble is the most prominent example of an RC telescope, though the majority of scientific telescopes in use today are RC designs.

The RC form is not corrected for higher-order coma which becomes significant at large apertures (> f/3 or so), is not well corrected for field curvature, and suffers from extreme high-order astigmatism. The result is the form being limited very strongly in field of view. Still, over narrow fields of view, the image quality is superb.

The final step in telescopes is TMAs, or three mirror anastigmats. TMAs are corrected for spherical aberration, coma, and astigmatism, leaving only field curvature; what is considered to be the fundamental problem of lens design, as it is the only aberration with no zero condition. The James Webb Space Telescope is a TMA, and a good example of how the name has lost some meaning. JWST's primary camera is a 5-mirror design, and NIRCAM adds a further 9(!) mirrors, but we still consider the design to be a TMA.

TMAs are used when large fields of view are desired. The JWST is both slow and has a narrow field of view, but due to its nearly 150km focal length, the geometrical aberrations are inherently far larger than e.g. Hubble, as they scale with focal length.

Where does all this sit with the mirror lenses you can buy for your camera? Those lenses are all catadioptric telescopes, using both mirrors and lenses. These systems combine the issues of both reflective and refractive systems, obscuration and chromatic aberration, respectively.

Most mirror camera lenses are maksutov designs, which utilize a meniscus lens and a spherical mirror. Neither of these corrects spherical aberration, but they contribute it in opposite signs if the meniscus lens is negative. Meniscus lenses are also used to correct field curvature, and when away from the aperture stop (which is usually the primary mirror in these lenses), coma as well. The result is a design which, in theory, should provide good performance over a decent field of view if used at small apertures.

So where's the problem? In the beginning of this answer I mentioned the issue of obscuration. A Maksutsov camera still features a secondary mirror to reflect the image into the camera body. This produces an obscuration. Obscurations strongly impact the low and mid spatial frequencies, resulting in images that are low contrast.

Additionally, these designs are somewhat alignment sensitive compared to a standard camera lens. Nearly all of these lenses are sold by lower-price third parties; it is possible they are nearly all misaligned enough to visibly impact the images.

The meniscus lens is also not very good for stray light when working with objects far away; it makes objects closer to the camera appear further away, and they will form images on the detector as well, albeit out of focus ones. The result is a further loss of contrast due to veiling glare.