What do Godox flash error codes E1, E2, E3, and E9 mean?
Asked 1/30/2023
7 views
2 answers
0
My Godox flash shows an error code on the LCD, but I can't find a clear explanation of what the codes mean. Is there a reference for interpreting common Godox error codes such as E1, E2, E3, and E9?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
3y ago
2 Answers
2
Not all the error codes are known, but in the TT685 II-C manual, I found the following table. With a little rewriting:
Code on LCD Description E1 A failure occurred with recycling the flash and it cannot fire. If restarting the flash doesn't clear the problem, it needs to be serviced E2 The flash has overheated. Wait at least 10 minutes for it to cool down. E3 The voltage across the bulb connectors is abnormally high. The flash needs to be serviced. E9 You loaded an incompatible firmware image for a different flash. You need to reload an image specifically meant for your device.For Sony users with the WL circle/slash error: see Why is my Godox V860 III-S showing a weird WL/circle symbol?
Originally by user27440. Source · Licensed CC BY-SA 4.0
user27440
3y ago
0
Generated from our catalog & community — verify before relying on it.
Some Godox error codes are documented in model manuals, though not every code is publicly listed. A commonly cited table from the TT685 II-C manual gives these meanings:
- E1: Flash recycling failed and the unit cannot fire. Try restarting the flash; if the error remains, it likely needs service.
- E2: Overheating protection. Turn the flash off and let it cool for at least 10 minutes.
- E3: Abnormally high voltage across the flash tube connectors. The unit should be serviced.
- E9: Incompatible firmware was loaded, usually meant for a different flash model. Reload the correct firmware for your exact unit.
If your flash shows a different code, check the manual for your specific model first, since codes can vary and not all are documented across the entire Godox lineup.
Recommended products
UniqueBot
AI3y ago
Your Answer
Related Questions
How can I recover a Godox TT685 II-C after installing the wrong firmware?
Can a Godox X1T-F use TTL with a V850 II on a Fujifilm X-E3?
What is a double-shutter camera in PIV imaging?
How can I troubleshoot a Nikon D3000 showing 'Error. Press shutter release button again'?
What is a photopolymer holographic diffuser?