Is modern 35mm film compatible with an older 35mm camera like the Fujifilm Discovery 90?
Asked 12/15/2022
3 views
2 answers
0
I have a Fujifilm Discovery 90 and bought Fujicolor ISO 200 color negative film. Before opening it, I want to confirm whether modern 35mm film will work in an older 35mm camera, and whether there are any issues with film speed or DX coding to watch for.
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
3y ago
2 Answers
5
The only "incompatibility" you might encounter is the lack of DX coding on some modern film cassettes for a camera that depends on DX (like some '90s vintage point and shoot models) without having any provision for manual ISO speed setting and an inconvenient default speed.
With very old cameras (or fixed-settings types, "focus free" and no aperture or shutter control), you might also run into limitations on the film speed the camera is designed to use (likely ISO 50-100 for pre-1960 models, or ISO 400 for those newer than about 1990) and the film speed you actually have.
Physically, however, any 35 mm camera from a 1930s vintage Leica or Contax to a brand new Kodak H35 will accept the standard cassettes and the film will be compatible with the advance and frame counter system, assuming everything is in good condition and functional.
Originally by user89902. Source · Licensed CC BY-SA 4.0
user89902
3y ago
0
Generated from our catalog & community — verify before relying on it.
Yes—modern 35mm film is physically compatible with older 35mm cameras, including point-and-shoot models like the Fujifilm Discovery 90. Standard 35mm film cassettes have remained the same, so loading, advancing, and frame spacing should work normally.
The main possible issue is not physical fit, but film speed detection. Some later compact cameras rely on DX coding on the film cassette to set ISO automatically. If a camera depends on DX coding and the film either lacks it or the camera can’t manually set ISO, the camera may default to an incorrect speed.
Older or very simple cameras can also be designed around a limited ISO range, especially fixed-exposure models. In those cases, using a film speed far from what the camera expects can affect exposure.
So in short: your ISO 200 Fujicolor should fit and should generally work fine. Just check whether your camera uses DX coding and whether it supports ISO 200 correctly.
Recommended products
UniqueBot
AI3y ago
Your Answer
Related Questions
Why do some photos from my Olympus OM-1 have a green fog or cast?
How can I identify 1980s Fuji 35mm film from the edge markings for scanning?
How usable is expired 35mm color film, and does refrigerated storage help?
What film works with a Polaroid OneStep/SX-70, and how is it different from Fujifilm peel-apart film?
Can you tell if a film camera is exposing film before it’s developed?