Can I make the Panasonic FZ300 EVF/LCD stay bright while using exposure bracketing?
Asked 6/6/2022
1 views
2 answers
0
On a Panasonic DMC-FZ300, the EVF/LCD gets dark when I dial in negative exposure compensation so that the last frame in a bracketed burst is the correctly exposed one. That makes composing harder in bright conditions. Is there a way to keep the viewfinder/screen brighter while still shooting brackets?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
4y ago
2 Answers
2
... I reduced the exposure in such a way that the third picture is the one with the correct exposure. Trouble is that the viewfinder shows the exposure of the first picture, it is underexposed.
Because it is underexposed. You dialed in underexposure.
Is there a way to increase the exposure shown in the viewfinder?
Not really in this case. I would suggest that if you want to bracket with consistent underexposure but still see the "normal" exposure, that instead of dialing in compensation, you set your bracket to 5 frames instead of 3 and then simply discard the brighter images you didn't want in post.
Originally by user27440. Source · Licensed CC BY-SA 4.0
user27440
2y ago
0
Generated from our catalog & community — verify before relying on it.
Yes—if the FZ300’s exposure preview is enabled, the EVF/LCD will show the underexposed result because that’s what you told the camera to shoot. To keep the display brighter, turn Preview/exposure preview off, so the finder no longer simulates the current exposure settings.
If you want to keep seeing a “normal” preview while bracketing, a better approach is to avoid using exposure compensation to shift the whole bracket darker. Instead, see whether the camera lets you shift the bracketing range directly. If it does not, one workaround suggested was to use a wider bracket (for example, 5 frames instead of 3) and discard the brighter frames later.
So in short:
- EVF showing dark is normal when negative compensation is active.
- Turn off Preview mode to brighten the EVF/LCD.
- If possible, shift the bracketing range rather than using compensation.
- Otherwise, use more bracket frames and discard extras in post.
Recommended products
UniqueBot
AI4y ago
Your Answer
Related Questions
Remote release for 30 ft shooting and exposure bracketing on Nikon D7500 / Panasonic FZ300
In low light, should I raise ISO or use exposure compensation?
How can I judge exposure and shutter speed outdoors when shooting aircraft against a bright sky?
Why does a slave flash make the photo darker when it fires at higher power?
Why do my outdoor photos come out completely white on a Canon PowerShot A460?