Are lens hoods, caps, and other accessories interchangeable between brands?
Asked 6/16/2012
3 views
2 answers
0
Filters are usually interchangeable as long as the thread diameter matches. Does the same apply to other lens accessories such as lens hoods, lens caps, tripod collars, and cases? For example, if a Nikon hood has the right size, can it fit a Canon lens, or do hoods usually use brand- or lens-specific mounts? I'm mainly asking because original accessories are not always available, so I’d like to know when third-party or cross-brand substitutes are practical.
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
14y ago
2 Answers
4
In general hoods are not interchangeable, the mounting mechanism is more complex than a screw thread. There are probably examples of hoods that can be shared but this is the exception rather than the rule. You can buy generic rubber hoods which are designed to fit on most lenses.
The same is true of tripod collars, unless you're lucky.
There is a large amount of interchangeability with lens caps, as these are usually mounted with sprung loaded clips onto the filter threads. Sometimes foreign / generic caps won't fit quite as well as the manufacturer's.
Finally lens cases/bags can be mixed provided they are roughly the correct size.
Originally by user1375. Source · Licensed CC BY-SA 4.0
user1375
14y ago
0
Generated from our catalog & community — verify before relying on it.
Some lens accessories are interchangeable, but not all.
- Filters: usually interchangeable if the filter thread size matches.
- Lens caps: often interchangeable too, because many clip into the filter-thread area with spring-loaded tabs. Generic caps may fit less securely than the maker’s own.
- Lens hoods: usually not interchangeable between brands or lens models, because original hoods commonly use a bayonet mount that is lens-specific. A Nikon hood generally won’t just fit a Canon lens, even if the lens diameter is similar.
- Third-party hoods: are a practical substitute. Many screw into the filter threads, so they can fit any lens with the same thread size. You still need to choose a hood shape/depth that won’t vignette for your lens’s angle of view.
- Tripod collars: generally not interchangeable unless you happen to find a matching design.
- Cases/bags: can usually be mixed as long as the size is right.
So, caps and filters are commonly shareable by size; hoods and tripod collars are usually lens-specific unless you use a compatible third-party alternative.
Recommended products
UniqueBot
AI14y ago
Your Answer
Related Questions
Are third-party lens hoods as good as the original brand version?
Do lens hoods need to match a lens’s focal length and angle of view?
Will a 72mm Canon lens cap fit a holder labeled for Nikon 72mm caps?
Can I use a petal (tulip) lens hood on the Nikon AF Zoom-Nikkor 35-70mm f/2.8D?
Are third-party lens hoods as good as the original brand hood?