Rode Lavalier GO for Wirless GO System - Black
- Rode Lavalier GO Omnidirectional Lavalier Microphone
- Clip-On Lavalier Microphone
- Designed For Wireless GO System
- Made For Mobile Journalists & Videographers
- Features Durable Kevlar-Reinforced Cable
- Provides Broadcast-Quality Audio
- 4.5mm Miniature Microphone Capsule for Discretion
- Features Condenser Microphone Element
- Active JFET Electronics Yield 20 Hz to 20 kHz Frequency Response
- Gold-Plated 3.5mm TRS Connector for Enhanced Conductivity
- Included Foam Pop Shield Softens Vocal Plosives/Wind Noise
- Microphone Clip With Cable Management (Included)
- Includes Small Pouch for Storage/Transport
OVERVIEW
The Rode Lavalier GO Omnidirectional Lavalier Microphone is designed for Rode's Wireless GO System, & is also an ideal audio microphone for mobile journalists & videographers. Rode's GO Lavalier Microphone provides you with the convenience of broadcast-quality audio, with full clarity, while allowing you to clip the miniature microphone capsule right onto your shirt for discretion. The 3.5mm TRS Conector is gold-plated for enhanced conductivity, while the microphone cable is made of durable Kevlar-Reinforced material. The microphone features a condenser microphone element, as well as active JFET electronics, which yield a frequency response of 20 Hz to 20 kHz. A foam pop shield is also included, to soften vocal plosives & wind noise that may normally cause the audio levels to clip. The GO Lavalier Microphone also includes a small pouch for storage & transportation when not in use.
A separately available Rode SC4 Adapter enables the use of the Rode GO Lavalier Microphone with smartphones & tablets, which contain a 3.5mm TRRS jack.
In the Box
- Rode Lavalier GO Omnidirectional Lavalier Microphone for Wireless GO Systems
- Pop Shield
- Lavalier Clip
- Pouch
Brand
physical specifications
| Weight | 0.56 oz / 16 g |
| Length | 0.94" / 24 mm |
| Color | Black |
detailed specifications
| Type of Microphone | Lavalier Microphone |
brand
| Brand | Rode |
microphone specifications
| Sound Field | Mono |
| Operating Principle | Pressure Operated |
| Transducer Principle | Electret Condenser |
| Diaphragm | 0.18" / 4.5 mm |
| Polar Pattern | Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Equivalent Noise Level | 27 dB |
| Maximum SPL | 110 dB SPL |
| Impedance | 3 kOhms |
| Sensitivity | -35 dB |
| Connector Type | 1/8" / 3.5 mm |
| Diameter | 0.20" / 5 mm |
| Dynamic Range | 83 dB |
| Signal to Noise Ratio | 67 dB |
| Operating Voltage | 2.7 V |