The Blackmagic Design PYXIS 12K Cinema Camera (ARRI PL) records 12K RAW, but its rigging needs matter as much as its resolution.

A PL-mount camera built to be rigged
The Blackmagic Design PYXIS 12K Cinema Camera (ARRI PL) is a digital cinema camera with a large-format, full-frame CMOS sensor and an ARRI PL lens mount. It costs $5,825 and is in stock at Unique Photo.
The body measures 5.94 x 4.69 x 4.17 inches and weighs 3.5 lb before adding a lens or accessories. Multiple mounting points and switchable side plates let the camera become part of a production-specific rig. Compact dimensions are useful here, but the body-only weight is not the weight of a working camera package.
12K open gate and the frame-rate trade-off
The sensor measures 35.64 x 23.32 mm, with an effective resolution of 98.8 megapixels. Blackmagic lists recording up to 12K 3:2 Open Gate in Blackmagic RAW. Open-gate recording gives an editor more image area to work with when making different delivery crops, while the high pixel count provides room for reframing for lower-resolution output.
Frame rate depends on the recording resolution. These are four listed combinations:
| Recording resolution | Maximum frame rate |
|---|---|
| 12,288 x 8,040 | 40 fps |
| 12,288 x 6,912 | 45 fps |
| 12,288 x 6,480 | 50 fps |
| 8,192 x 5,360 | 72 fps |
The practical distinction is that the maximum resolution and maximum listed frame rate are not available together. Choose the recording format around the shot, rather than treating “12K” as the whole specification.
A built-in optical low-pass filter helps reduce aliasing and moiré from fine repeating details, such as fabrics. That is a different job from simply recording more pixels.
RAW recording, proxies and media connections
The PYXIS records 12-bit Blackmagic RAW and can record small H.264 proxy files at the same time. Proxies give the edit a lighter set of files to work with while retaining the RAW originals for finishing. They do not remove the need to plan storage for the original recordings.
There are two CFexpress Type B card slots and a USB-C port. The camera also has 10GbE Ethernet, with Ethernet media sharing to Blackmagic Cloud, and Blackmagic lists 10GHDBase-T support. For a production already using a networked workflow, those connections deserve attention alongside the sensor resolution.
The fixed screen and handheld limitations
The built-in monitor is a fixed 4-inch HDR touchscreen LCD with 1920 x 1080 resolution. Its position matters when arranging the rig: mounting the camera high or low does not make that screen tilt toward the operator. Leave a usable viewing angle rather than placing accessories wherever they happen to fit.
There is no image stabilization. Steady footage therefore depends on camera support and operating technique rather than stabilization inside the body. The camera uses Sony BP-U Series batteries, another item to account for when planning the package.
Blackmagic lists automatic and manual focus modes. That does not turn the manual-focus Sigma PL lenses discussed below into autofocus lenses; the lens choice remains part of the operating decision.
Who should choose it, and who should look elsewhere
This configuration makes sense for narrative productions and controlled commercial work where PL lenses and a built-up camera rig are already part of the plan. The 12K open-gate recording is particularly relevant when one shoot must supply different framing formats or leave room for reframing in post.
It is a less suitable choice for an operator whose priority is stabilized walking footage with minimal setup. The fixed display also needs consideration for frequently changing camera positions. Productions requiring more than 40 fps at 12,288 x 8,040 should look elsewhere rather than assume a lower-resolution frame-rate specification applies to full-resolution recording.
Two manual-focus PL prime options
The Sigma 35mm T1.5 FF High-Speed Prime Lens (ARRI PL, Metric) is $3,499 and available to order. Its full-frame diagonal angle of view is 54.4°, and minimum focus distance is 0.3 m. It is the wider option for interiors or framing that needs more surroundings.
The Sigma 50mm T1.5 FF High-Speed Prime Lens (ARRI PL, Metric) is also $3,499 and available to order. It provides a 39.8° full-frame diagonal angle of view and focuses down to 0.4 m. From the same camera position, it gives tighter framing than the 35mm.
Both have T1.5 maximum apertures, manual focus and clickless manual iris rings. Their 180° focus-ring rotation gives room for controlled focus pulls, while 0.8 Mod gears accommodate geared accessories. Both use metric scale markings and 82 mm filter threads. The 35mm weighs 2.30 lb; the 50mm weighs 2.66 lb. Either adds appreciably to the camera's body-only weight.
Physical controls for the grading desk
The Blackmagic DaVinci Resolve Micro Panel with Resolve Studio Software costs $945 and is available to order. This is a post-production accessory for working in Resolve, not an addition to the shooting rig.
It provides three trackballs, 12 correction-control knobs and 18 navigation and transport keys. Those physical controls suit an editor who wants direct access to grading adjustments rather than relying entirely on mouse input. The panel supports Windows, Mac and Linux through USB 3.0 Type-C. A USB 3.0 Type-A to Type-C cable is included.
Prices at Unique Photo
Prices as of November 18, 2026. Browse more: Cinema Cameras, Blackmagic at Unique Photo.
Frequently asked questions
What is the maximum recording resolution of the PYXIS 12K?
The maximum listed recording resolution is 12,288 x 8,040 in Blackmagic RAW, at up to 40 fps. At 8,192 x 5,360, the listed maximum is 72 fps.
Does the Blackmagic PYXIS 12K have image stabilization?
No. Blackmagic lists no image stabilization for this camera.
What memory cards does the PYXIS 12K use?
It uses CFexpress Type B cards and has two card slots.
What batteries does the PYXIS 12K use?
The camera uses Sony BP-U Series batteries.