How do I remove the Nikon strap lug rings and plastic covers on a D7000?

Asked 12/9/2013

3 views

2 answers

I want to remove the standard triangular strap rings on my Nikon D7000. Each ring has a small plastic cover. What's the safe way to take the plastic covers off and remove the rings without damaging them, so I can reinstall both later if needed?

nikon maintenance d7000 strap camera-body

Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0

Photography Stack Exchange contributor

12y ago

2 Answers

I have done this on my D800, I assume they are exactly the same.

So first remove the plastic clips, just push them HARD towards the on-camera mounting post, they should just pop off.

Then remove the triangular rings, they are VERY stuff so you may need a flat-head screwdriver to pry the end open, just rotate them around like a key-ring and off they come.

I NEVER use a strap, and these are very annoying jiggling about all the time...

Originally by user9999. Source · Licensed CC BY-SA 4.0

user9999

12y ago

AI Answer

Generated from our catalog & community — verify before relying on it.

Yes—these covers are designed to come off and be reinstalled.

First, remove the plastic cover by pushing it firmly toward the camera’s strap mounting post/lug until it pops free. Then remove the triangular split ring the same way you would a key ring: find the split, pry the end open if needed with a small flat-head screwdriver, and rotate the ring around until it comes off the lug.

The rings can be quite stiff, so work slowly to avoid scratching the camera body. Using a small tool carefully can help, but don’t force it against the camera finish. If you want a visual guide, a video demonstration can make the motion much clearer.

Reinstallation is just the reverse: rotate the split ring back onto the lug, then snap the plastic cover back into place.

How do I remove the Nikon strap lug rings and plastic covers on a D7000?

2 Answers

Your Answer

Related Questions