Everything you ever wanted to know about the Godox/Flashpoint 2.4GHz RF Radio System Part One and Part 2.

Your Flashpoint Streaklight 360 TTL for Nikon (Godox AD360II) can be used as part of the Godox/Flashpoint 2.4GHz system. It has a built in 2.4GHz radio receiver that uses the Godox/Flashpoint protocol. Any Godox/FP 2.4GHz trigger or any Godox/FP 2.4GHz "Master Flash" can control flashes that are part of the Godox/Flashpoint 2.4GHz radio system. This includes:

Controllers (those with an asterisk are Manual only, all others are TTL + Manual)

• X2T/R2 II TTL
• R2 Pro II
• XPro/R2 Pro
• X1T/R2 TTL
• XT32*/R2T 32*
• XT16*

Master flashes (those with an asterisk are Manual only, all others are TTL + Manual)

• TT350/Zoom-Mini R2 TTL
• V350/Zoom-Mini Li-Ion R2 TTL
• TT600/Zoom R2 Manual*
• V850II/Zoom Li-Ion R2 Manual*
• TT685/Zoom R2 TTL
• V860II/Zoom Li-Ion R2 TTL
• V1/Zoom Li-Ion X R2 TTL
• AD360II/Streaklight 360 R2 TTL

Note that TTL capable Controllers and Master flashes are brand specific (Nikon, Canon, etc.) when used on the brand specific camera (Nikon, Canon, etc.). This is due to the different patterns of the connection interface that each brand (Nikon, Canon, etc.) uses. However, the radios in Controllers and "Master Flashes" are cross-compatible with all off-camera flashes in the Godox/FP 2.4GHz system. That is, a "Nikon" AD360II can be controlled via radio by a "Canon" R2 Pro. Some brand specific (Nikon, Canon, etc.) TTL features may not be available when, for example, using a Nikon camera + controller with an off-camera Canon/Sony/Fuji flash. But all manual features should be available with all combinations of Godox/FP 2.4GHz Controllers/"Master Flashes" and Godox/FP off camera flashes.

In addition to the "Master Flashes" listed above, the following flashes can also be used as radio controlled off camera "slaves" with the Godox 2.4GHz system. The 'Speedlights' have built-in radio receivers, as do the other units listed below (Manual only flashes marked with an asterisk):

• AD200/Evolv 200 R2 TTL

• AD200 Pro/Evolv 200 Pro TTL

• AD400 Pro/Xplor 400 Pro R2 TTL

• AD600BM*/Xplor 600 R2 HSS*

• AD600B/Xplor 600 R2 TTL HSS

• AD600 Pro/Xplor 600 Pro

• ADH600B*/ADH1200B*/Xplor 600ws Extension Head*/Xplor 1200ws Extension Head*

• QT400II-M*/QT600II-M*/QT800II-M*/Rapid 600 R2 HSS*

• QT1200II-M*

• QS400II*/QS600II*/QS800II*

• QS1200II*

• SK300II*/SK400II*/Studio 300 R2*/Studio 400 R2*

• DP300II*/DP400II*/DP600II*/DP800II*/DP1000II*

• DS300II*/DS400II*

• GS200II*/GS300II*/GS400II*

There are older "legacy" Godox/Flashpoint flashes that can be used in the 2.4GHz system with clip-on receivers. These older flashes are all manual only when used with the following clip on receivers:

• XTR-16 (for bare bulb and studio strobes)
• XTR-16s (for speedlights)

To use other non-Godox/Flashpoint off-camera flashes, such as your SB700 and Nissin Di700 TTL flashes, with the Godox system you would need to attach a Godox X1R 2.4GHz receiver to the hot foot of the flash. If the flash is TTL capable, then using the appropriate version (Nikon, Canon, etc.) of the X1R receiver would allow the flash to be used as a TTL flash.

• X1R