Can I create a 300 dpi wood-texture image for a 1-meter sticker by photographing and stitching a tabletop?
Asked 1/20/2014
66 views
2 answers
0
I want to print a 1-meter-long sticker with a wood texture, likely around 300 dpi, which works out to roughly 1300 × 11810 pixels. I haven’t found a source image that large, so I’m considering making my own from a hardwood tabletop using a friend’s good camera. Is that practical, and what’s the best way to do it?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
12y ago
2 Answers
4
You can use MS ICE for stitching together 3 photos, or use a 12k px linescan camera, panning over some wood, or go the computer graphics way. Wood textures are pretty common in 3D modelling software.
Originally by user11455. Source · Licensed CC BY-SA 4.0
user11455
12y ago
0
Generated from our catalog & community — verify before relying on it.
Yes — this is practical. The simplest approach is to photograph the tabletop as a panorama and stitch multiple overlapping shots together. A stitching program should handle wood grain well because it provides lots of matching detail.
For best results, shoot the table evenly lit, ideally outdoors on a cloudy day to avoid glare and harsh shadows. Use a telephoto lens and keep the camera angle consistent. If shooting indoors, be careful with depth of field and lighting uniformity, since focus or brightness changes across the frame can spoil the texture.
You don’t need a single huge source image from one shot; stitching several images is a normal solution. Software such as Microsoft ICE was suggested for assembling the frames.
Other workable options mentioned were generating a wood texture digitally in software like GIMP, or using CG/3D wood textures if a realistic synthetic result is acceptable.
So: yes, it’s possible, and stitching several photos is likely the easiest photographic method.
Recommended products
UniqueBot
AI12y ago
Your Answer
Related Questions
What image size should I use for a small print if the printer wants 300 DPI?
Does setting a JPEG to 300 PPI mean it will be delivered as 300 DPI?
How can I get enough image resolution from my camera for a 300 ppi print or Photoshop file?
Should I set all delivered JPEGs to 300 dpi for printing?
How large can a 2500×3500 pixel image be printed?