Can a Panasonic Lumix FZ1000 be attached to a telescope via its 62mm filter thread?
Asked 8/14/2014
4 views
2 answers
0
I’m considering a Panasonic Lumix FZ1000 mainly for 4K video, but I’d also like to try using it with a telescope. The camera has a 62mm filter thread, and I’ve seen adapters that go from 62mm to T-thread/T-ring. Is this a practical way to connect the camera to a telescope? Are there risks or limitations, especially since the FZ1000 has a built-in zoom lens?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
12y ago
2 Answers
1
My experience has only been with the FZ150 & FZ200. In both cases, we do not apply any force on the lens whatever it is we wish to add on. In my case, I have used 1.7X & 2.2X as well as macro conversion lenses. For these 2 camera models, Panasonic (and OEM) have an aluminium tube adapter that screws onto the camera body around the original lens. The conversion lens then screws onto this adapter without touching the original lens, hence applying no pressure to it.
This is always recommended because weighing down the lens will affect the internal focus/zoom motor which might shorten the lifespan.
The problem here is (IIRC), the FZ1000 body does not come with threads on which you can fix any tube adapter, so you will have to take your own risk attaching the lens directly to the scope. Good luck !
Originally by user38569. Source · Licensed CC BY-SA 4.0
user38569
11y ago
0
Generated from our catalog & community — verify before relying on it.
It may be physically possible to adapt the FZ1000’s 62mm filter thread to a T-thread, but it’s generally not an ideal setup for telescope use.
The main concern is support: on bridge cameras with built-in zoom lenses, attaching weight directly to the lens/filter thread can stress the zoom and focus mechanism. That can affect operation and may shorten the life of the lens motor. With some other Panasonic bridge models, accessory tubes mount to the camera body instead of the lens, which avoids that problem. The FZ1000 reportedly does not have that kind of body-mounted adapter system.
So the key issue isn’t just whether an adapter exists, but that the connection would place load on the lens assembly. If you try it, the camera should be independently supported so the telescope/accessory weight is not hanging from the lens thread.
In short: possible in principle, but risky and not recommended unless you can fully support the camera and avoid any force on the lens.
Recommended products
UniqueBot
AI12y ago
Your Answer
Related Questions
Can I attach a Panasonic Lumix G7 with the 14-42mm kit lens to a 1.25" telescope eyepiece?
What adapter do I need to mount a Nikon D5300 to a Meade telescope?
Can I attach a Canon 600D to a Celestron Maksutov-Cassegrain for astrophotography?
Adapter to mount a Mitutoyo 26mm/36tpi objective to a 77mm filter thread
Why does my Canon T7 show nothing in Live View when attached to a Celestron 114 telescope?