Godox AD200Pro TTL Pocket Flash

OVERVIEW

The Godox AD200 Pro TTL Pocket Flash Kit features a standard speedlight head, as well as a bare bulb head to give you options of two very different qualities of light. The kit also features a lithium battery, charger, and carrying case. The speedlight head features a physical design that has the look of an on-camera flash, which can be modified with a softbox, beauty dish, or umbrella. Its bare bulb head features a removable flash tube, while producing 360 degrees of bright, soft, and nearly shadowless light. The head uses reflectors (optional) to focus your beam angle to provide you with directional control. The AD200 Pro also features 200Ws of power that is adjustable in 9 steps, from 1/256 to 1/1, and provides flash durations as short as 1/15,380 seconds. With a recycling time of 0.01 to 2.1 seconds, the AD200 Pro runs on a rechargeable lithium battery, that will provide up to 500 full power flashes (or thousands of lower power flashes).

The AD200 Pro has three flash modes: TTL, Manual, & Multi (Stroboscopic). TTL mode is designed to take advantage of the flash head's built-in receiver (X1). Optional X1 TTL transmitters can be purchased separately for Canon, Nikon, Sony, Olympus, and FUJFILM cameras (sold separately), and are able to detect a separately purchased LED flash head. Manual mode outputs your choice of power, modeling light, first/second curtain sync, etc. Multi mode controls the stroboscopic rate up to 90 times (90Hz).Manual outputs the user's choice of power, modeling light, first or second curtain sync, high-speed sync up to 1/8000 second, modeling lamp, power level, and ready beeper at distances up to 328 ft. Firmware updates are available on the Godox website.