Sylvania CAL-CXP 300W/120V Projector Lamp

The Sylvania CAL-CXP 300W/120V Projector Lamp is a replacement projection lamp built for applications that require dependable brightness, stable output, and proper fitment to equipment designed around the CAL lamp specification. As a genuine Sylvania lamp, it is intended for users who need a correct replacement based on the manufacturer number rather than relying on uncertain substitutes. Matching the exact lamp code is important in projector and display systems because wattage, voltage, base type, and optical alignment all play a role in safe operation and image quality.

Compatible With

• Projectors and optical display equipment that specifically require a CAL / CXP 300W 120V lamp

Key Features

This lamp is rated at 300 watts and 120 volts, making it suitable for compatible projector systems engineered for that electrical load. It is designed to provide the intense illumination needed for projected images, slides, film, or other optical presentation formats that use specialty incandescent projection lamps. Choosing the exact CAL designation helps maintain original equipment performance, proper beam characteristics, and reliable installation.

Why Exact Lamp Matching Matters

Projection lamps are not generic household bulbs. Even when wattage appears similar, differences in lamp code, operating voltage, filament design, and envelope construction can affect brightness, focus, heat behavior, and service life. Using the Sylvania CAL-CXP lamp as the specified replacement helps preserve the intended illumination pattern and reduces the risk of poor performance caused by mismatched alternatives.

Performance Benefits

A correct projector lamp replacement can restore lost brightness and improve overall viewing quality in aging projection equipment. Users replacing a dim, darkened, or failed lamp may notice better image clarity, stronger light output, and more consistent presentation performance. Sylvania has long been associated with specialty lighting products, making this lamp a practical choice for maintenance of compatible legacy projection systems.

Applications

The CAL-CXP lamp is commonly used in projector and optical equipment where high-output incandescent illumination is required. It may be suitable for certain slide projectors, film projectors, enlargers, viewers, or specialty display systems that explicitly call for the CAL lamp type. Always verify the exact lamp code in your equipment manual or on the old lamp before installation.

Installation and Handling Tips

When replacing a projection lamp, allow the unit to cool fully before opening the lamp compartment. Handle the lamp carefully and avoid unnecessary contact with the glass if the equipment manufacturer recommends clean installation practices. Confirm that the replacement code, wattage, and voltage all match the original specification. After installation, ensure the lamp is seated correctly to support proper optical alignment and dependable operation.

Recommended Accessories

Helpful accessories for projector lamp replacement and maintenance may include lint-free gloves, a soft cleaning cloth for the projector exterior, compressed air for non-contact dust removal around vents, and a protective storage solution for spare lamps. For vintage or specialty projection equipment, keeping a backup lamp on hand can also help minimize downtime.

Specifications

Brand: Sylvania
Model: CAL-CXP
Manufacturer Number: CAL
UPC: 043168991469
Lamp Type: Projector lamp
Maximum Wattage: 300W
Operating Voltage: 120V

Buying Notes

If you are replacing a lamp in older equipment, the most important specification is the exact lamp code. The Sylvania CAL-CXP should be selected when your projector or optical device explicitly specifies CAL. This helps ensure proper electrical compatibility and intended illumination performance. If your current lamp carries a different code, even with similar wattage, it should not be assumed interchangeable without manufacturer confirmation.