The Savage Edge Lit Pro LED Light Kit includes two bi-color panels with stands and batteries, plus a 3200K to 5500K color range.

What the $550 kit includes
The Savage Edge Lit Pro LED Light Kit is a two-light package for portrait photography, priced at $550 and in stock at Unique Photo. It includes the supports and battery equipment needed to put both lights into a setup, rather than leaving those as separate purchases.
- Two Edge Lit Pro LED lights
- Two 7-foot air-cushioned drop stands and two rotating light stand adapters
- A multichannel remote control
- Four Sony NP-F750 batteries with chargers
- A padded rolling case
Two lights provide a useful starting point for portraits: one can serve as the main light while the other supplies fill or lights the background. Those are different assignments, not a requirement to use both lights at every session. The rolling case gives the kit a way to travel together, including the stands and power accessories.
3200K to 5500K adjustment and CRI 95
Savage lists a color-temperature range of 3200K to 5500K. These are bi-color lights, with the two color levels blendable to select a temperature within that range. The lower end is warmer; the upper end is closer to daylight color temperature.
That adjustment matters when the portrait subject is also receiving light from the room or a window. Moving the panel's color temperature closer to the surrounding light can reduce the difference in color between areas of the subject. It does not make every mixed-light situation match automatically.
The CRI rating is 95. CRI describes color rendition, so it is relevant to skin tones and clothing colors rather than brightness. A high CRI rating and an appropriate camera white balance address different parts of the color problem; one does not replace the other.
Brightness and the 75-minute operating time
Savage lists output at 1,677 lumens at 1 m. Keep the unit in mind when comparing lights: that is a lumen figure, not a lux rating, and the two are not interchangeable. CRI 95 is also separate from output. It describes color rendition, not how much light reaches the subject.
Placement still matters. Moving a light farther from the subject reduces the illumination reaching it, so a setup arranged around one seated person makes different demands than a larger scene. Having two panels provides placement options; it does not make subject distance irrelevant.
Savage lists 75 minutes of operation per lamp. The four included Sony NP-F750 batteries and chargers make battery power part of the package. For a session scheduled to run beyond 75 minutes, settle the power plan before the shoot rather than assuming the supplied kit means uninterrupted all-day operation.
12-by-9-inch panels and 7-foot stands
Each metal LED panel measures 12 by 9 inches (30.5 by 22.9 cm). The supplied rotating adapters allow the lights to be aimed from their stands, which matters when changing the direction of the main light or positioning the second panel for a different role.
| Stand specification | Listed value |
|---|---|
| Material | Aluminum |
| Minimum height | 35 inches (90 cm) |
| Maximum height | 84 inches (213 cm) |
| Closed length | 33 inches (84 cm) |
| Load capacity | 12 lb (5.4 kg) |
The height range determines how low or high the supplied supports can position a light. The 33-inch closed length is useful to check against transport space. Air cushioning slows a stand section as it is lowered, but the light should still be supported during height adjustments. The 12 lb figure is load capacity, not the stand's own weight.
Who it suits, and when to look elsewhere
This kit makes sense for a portrait photographer who wants two lights with supplied stands and battery equipment. Its adjustable color temperature is useful in locations where the surrounding light changes, while the padded rolling case addresses moving the equipment between setups. The appeal is the package, not just the two panels.
The limits are concrete. A job requiring a color-temperature setting below 3200K or above 5500K falls outside the adjustment range. A setup needing light positions above 84 inches exceeds the supplied stands' height. Those requirements point toward different equipment.
Long sessions also deserve a closer look. If uninterrupted operation beyond the listed 75 minutes is essential, that requirement should take priority over the convenience of buying a bundled kit. For shorter portrait sessions, the same operating figure may be easier to accommodate.
Included remote and optional RJ11 connectors
The included multichannel remote can control the LED lamps individually or together. Individual control is useful when the panels have different jobs, such as main light and fill. Each lamp also has a rear LCD, placing its display where it can be viewed from behind the light.
For integration with a DMX system, Savage specifies optional RJ11 connectors. These are the add-ons to consider if DMX connection is part of the intended setup. They are optional, unlike the multichannel remote supplied in the kit.
There is no need to add the listed batteries, chargers or rotating adapters just to obtain the package described here: those are already included. Keep the distinction between included accessories and optional DMX connectors clear when planning the purchase.
Prices at Unique Photo
- Savage Edge Lit Pro LED Light Kit: $550.00
Prices as of November 19, 2026. Browse more: Continuous Lighting, Savage at Unique Photo.
Frequently asked questions
What comes with the Savage Edge Lit Pro LED Light Kit?
The kit includes two LED lights, two 7-foot air-cushioned stands, two rotating adapters and a multichannel remote. Four Sony NP-F750 batteries with chargers and a padded rolling case are also included.
What is the Savage Edge Lit Pro's color-temperature range?
The bi-color lights adjust from 3200K to 5500K, with blendable color levels. Savage lists a CRI rating of 95.
How long can each Savage Edge Lit Pro light operate?
Savage lists 75 minutes of operation per lamp. The kit includes four Sony NP-F750 batteries with chargers.
Can the Savage Edge Lit Pro lights connect to DMX?
Yes. Savage specifies optional RJ11 connectors for connection to DMX systems.
How much does the Savage Edge Lit Pro LED Light Kit cost?
The kit costs $550 and is in stock at Unique Photo.