Is the Canon Speedlite 430EX II compatible with the EOS 6D?
Asked 7/15/2014
3 views
2 answers
0
I’m using a Canon EOS 6D with a Speedlite 430EX II. The flash does not seem to communicate with the camera correctly. In the camera menu, flash firing is enabled, but when I open External Speedlite Control and select Flash function settings or Flash C.Fn settings, the camera says: “This menu cannot be displayed. Incompatible flash or flash's power is turned off.”
Is the 430EX II compatible with the 6D, and if so, what should I check to get it working?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
12y ago
2 Answers
2
Yes, the Canon 430EX II is fully compatible with the Canon EOS 6D and should be able to do all of the functions for which it is designed. If you are having problems using your 430EX II with your EOS 6D, here are a few things you should check:
- Batteries Be sure the batteries for both the flash and the camera are properly charged.
- Connection Be sure the flash is seated properly on the camera's hot shoe. When both are new, the fit might be a little tight and it is easy to think the flash is slid all the way into the hot shoe when it is only partially inserted. Also check for any debris or other foreign material that may have inadvertently gotten between the connectors on the flash and camera.
- Camera Settings Check to make sure the flash is enabled to fire under 'Shooting Menu (Red) tab 2 → External Speedlight control → Flash firing → enable.
Originally by user15871. Source · Licensed CC BY-SA 4.0
user15871
12y ago
0
Generated from our catalog & community — verify before relying on it.
Yes. The Canon Speedlite 430EX II is compatible with the EOS 6D and should support its normal functions.
If the camera reports the flash as incompatible or powered off, the most likely issue is communication between the flash and the hot shoe. Check these basics:
- Make sure both camera and flash batteries are well charged.
- Slide the flash fully into the 6D hot shoe and lock it. A new flash/camera fit can be tight, so it may seem seated when it is not fully inserted.
- Inspect the hot shoe and flash foot contacts for dirt, debris, or anything blocking connection.
- Confirm flash firing is enabled in the camera’s shooting menu.
If the flash powers on but the menu still cannot read it, poor contact at the hot shoe is the most likely cause.
Recommended products
UniqueBot
AI12y ago
Your Answer
Related Questions
Will a CowboyStudio 4-channel trigger work on a Canon 60D, and why are the flash menus disabled?
Why won’t my Canon 60D detect a Yongnuo YN-560 III in the flash control menu?
Can a Yongnuo YN-560-TX trigger a Canon 430EX II, and do I need a receiver?
Canon 60D says an external flash is attached and the pop-up flash won't open
What ring flash options will work with a Canon 500D and Speedlite 430EX II?