Is it safe to film a sunrise at 600mm on a Nikon Z7 II, and do I need a solar filter?
Asked 11/12/2026
15 views
2 answers
0
I want to film the sun rising over Boston Harbor with a Nikon Z7 II and a NIKKOR Z 180-600mm lens at 600mm to make the sun appear as large as possible in the frame. What precautions should I take to avoid damaging the camera or sensor when filming the sun directly near sunrise? Does the low UV index at sunrise make it safer, or should I still use a solar filter?
Originally by Griff. Source · Licensed CC BY-SA 4.0
Griff
8d ago
2 Answers
0
Generated from our catalog & community — verify before relying on it.
Directly filming the sun always carries some risk, and there is no single yes/no answer because it depends on sun brightness, atmospheric haze, lens aperture, and how long the sun is focused on the sensor.
At sunrise, many people photograph or film the sun near the horizon without issues, especially while it is still dimmed by haze or cloud. But brightness can increase very quickly once the sun clears the horizon. At 600mm, the sun will occupy more of the frame, but the key risk factors are the lens opening, exposure duration, and how intense the sunlight is.
A practical rule: if the sun is comfortable to look at briefly without squinting, the camera is generally in a much safer zone. Once it becomes harsh or you feel the need to shield your eyes, risk increases.
The safest approach is to use a proper solar filter whenever the sun is directly visible, especially for video, since the sensor is exposed continuously. Also avoid looking at the sun directly through the camera. If you shoot without a solar filter, keep clips short and stop as soon as the sun brightens significantly.
Recommended products
Shure MoveMic Two 2-Person Wireless Lavalier Microphones for Mobile Phones
$279.00
View →
Kondor Blue Aluminum Body Cap for Nikon Z-Mount Cameras (Space Gray)
$55.00
View →
Nanlite 50 Degree Interchangeable Lens for FM Mount Projector
$139.00
View →
Nanlite lumo Phone Ring Light (MagSafe Compatible) (Polar Black)
$39.90
View →
UniqueBot
AI8d ago
0
You cannot find a straight answer because the answer depends on many different variables.
The amount of heat that the sun generates on the sensor depends on 1) the brightness of the sun; 2) the amount of light/heat captured by the lens and focussed on the sensor and 3) the length of time of this exposure.
1. Brightness of the sun
This varies hugely with the clarity of the atmosphere and elevation of the sun in the sky. Millions of photographs (including movie sequences) are taken of the sun close to sunrise or sunset and I have never heard of anyone's camera being damaged by this.
If you are using a very long lens so that the sun almost fills the frame, the main problem will be that the brightness rapidly increases as the sun rises above the horizon, often so much that the camera is unable to avoid extreme overexposure of the image. Overexposure will occur well before any damage to the sensor.
To avoid any risk of sun damage, if you are filming the sunrise and the sun becomes so bright that the image is highly overexposed, then stop filming (there will be nothing to see in the image anyway) and put the lens cap on or turn the camera away from the sun.
2. Light/heat on the Sensor
The amount of light/heat per unit area on the sensor is inversely proportional to the square of the f-number. So, stopping down an f/8 lens to f/22, say, will reduce the light/heat intensity by a factor of 8. However, the remaining \$\frac{7}{8}\$ths of the light will strike the aperture blades and in extreme circumstances they may be buckled by the heat although the sensor is unaffected.
If you are photographing the sun while it is high in a clear sky, a solar filter is generally needed to cut the light intensity to a safe level. A solar filter should always be placed in front of the lens (to protect both lens and sensor).
Sun damage to the sensor is probably more likely to occur when the camera is not in use, but left in a position in which the sun can shine directly into the lens while the aperture is fully open.
3. Length of Exposure
Ordinary landscape photography often includes scenes in which the sun is present in the frame, sometimes high in the sky and very bright. Such exposures are very short and the sensor suffers no damage. Even for mirrorless cameras in which the sensor is active all the time (for liveview), the aperture will automatically stop down if the sun is very bright and the sensor suffers no damage.
The aperture blades rarely suffer damage because the sun is all the time moving in the sky: it moves its own width in about 2 minutes. Damage is more likely if the camera is kept pointing at the sun for much longer periods of time; e.g. if the camera is mounted on a motor-driven astronomical telescope that is set to track the sun automatically.
Originally by Tom Axford. Source · Licensed CC BY-SA 4.0
Tom Axford
7d ago
Your Answer
Related Questions
Is an ND100000 filter safe for photographing a solar eclipse on a mirrorless camera?
Can direct sunlight damage a mirrorless camera sensor when photographing an eclipse?
Do I need a solar filter for landscape photos during an annular eclipse if the sun is small in the frame?
What filter do I need to photograph the Sun safely with a DSLR and telephoto lens?
How can I photograph a solar eclipse safely without harming my eyes or camera?