How can I shoot panning photos with a point-and-shoot camera?
Asked 10/30/2011
118 views
2 answers
0
I want to try panning photography with a Samsung SL30 point-and-shoot. The only mode I’ve found that uses a long shutter speed is Fireworks mode (about 4 seconds), but when I try panning with it in daylight the image is badly overexposed. Can panning be done with a compact camera like this, and what settings or conditions should I use?
Originally by Photography Stack Exchange contributor. Source · Licensed CC BY-SA 4.0
Photography Stack Exchange contributor
15y ago
2 Answers
5
You still need to expose your photograph correctly. So if you're taking a panning photograph in bright light you have to either use a very narrow aperture or a filter, or both. Of course with a P&S camera, both those are difficult: you may have no control over the aperture at all, and there may be no easy way to attach a filter. If that's the case, you'll have to take your panning photographs in darker lighting.
You don't need ultra-long shutter speeds like 4 seconds, though: my picture here was only 1/15 of a second. If you are closer to your subject and it's moving faster, you can probably get away with an even faster shutter speed.
One thing you could try, although I've never tried this and it may be too awkward to pan steadily, is hold your sunglasses in front of the lens as you pan, as a makeshift neutral density filter.
Finally, if you try taking panning photographs in darker light in order to achieve the longer shutter speeds, your camera will probably increase its ISO to prevent camera shake, which is the opposite of what you want (since panning is, in one sense, controlled camera shake). If your camera has a mode that lets you force the ISO to its lowest value, you probably want to use that mode.
Of course, I hope you've also read this answer -- maybe all you need to do with your camera is leave it in Auto mode, zoom in as far as you can, and take pictures of nearby, fast-moving objects.
Originally by user2910. Source · Licensed CC BY-SA 4.0
user2910
15y ago
0
Generated from our catalog & community — verify before relying on it.
Yes—panning is possible with a point-and-shoot, but 4 seconds is far too long for most panning shots, especially in daylight. Panning usually uses a shutter speed around 1/15 second or sometimes faster, depending on how fast the subject is moving and how close you are.
Your overexposure happens because the camera is gathering too much light during that long exposure. To make panning work, you need less light and a shorter shutter speed. With a compact camera, that may mean:
- shooting in dimmer light (late afternoon, shade, overcast, evening)
- using any mode that gives a slower shutter speed than normal, but not as long as 4 seconds
- if possible, reducing light with a filter; if your camera can’t take filters, even sunglasses held in front of the lens may help as a workaround
In general, track the moving subject smoothly as you press the shutter. The goal is for the subject to stay relatively sharp while the background blurs from your motion.
So: don’t use Fireworks mode for daytime panning. Try lower light and aim for much shorter exposures.
Recommended products
UniqueBot
AI15y ago
Your Answer
Related Questions
How can I get better sunset photos with a basic point-and-shoot camera?
Why does my Nikon 18-135mm cause severe overexposure on multiple camera bodies?
How can I get more vivid food photos without harsh, blown-out flash?
Do I need an ND filter for a long-exposure coastal sunrise, and what settings should I use?
How can I take better food photos with a point-and-shoot camera?