Tascam DR-10L Digital Audio Recorder with Lavalier Mic

Tascam DR-10L Digital Audio Recorder
Comes with lavalier mic
Dual-recording function
OLED display
Automatic file saving
Low-cut filter
Automatic volume level function
1/8" stereo headphone port
MicroSD card slot
Carry case
AAA battery
Color: Black

Color:: Black

Color:: The color of the item.

Overview

Record high-quality audio in the WAV format for a wide range of professional applications, with the Tascam DR-10L Digital Audio Recorder with Lavalier Mic. It comes with a unique dual-recording function, which makes it possible to record up to two audio clips simultaneously at different levels. The crystal clear OLED display enables you to keep an eye on the recorder’s battery during your audio-recording sessions. In case you run out of battery power, the recorder automatically saves your audio clip, thus saving you the trouble of recording the audio all over again. Use the automatic level function for adjusting the recording volume, as per the recording scenario. This compact, lightweight recorder runs on one AAA battery that offers up to 10 hours of charge.

Product Reviews

There are no reviews for this product.

Write a review

Specifications

Brand
Tascam - Tascam

Microphone Specifications
Polar Pattern:	Omni

Detailed Specifications
Sampling Frequency:	44.1kHz, 48kHz
Sampling Frequency: The sampling frequency is the number of times per second audio is sampled and stored as a number. View All Attribute Definitions
Signal-to-Noise Ratio:	88dB or higher (phones volume max, mic gain L selected)
Signal-to-Noise Ratio: The signal to noise ratio (SNR) is a useful and universal way of comparing the relative amounts of signal and noise for any electronic system; high ratios will have very little visible noise whereas the opposite is true for low ratios. View All Attribute Definitions
USB Terminal:	Connector: Micro-B type 4pin; Protocol: USB2.0 HIGH SPEED mass storage class
USB Terminal: This is a type of port used to connect a camera to a computer via USB cable. View All Attribute Definitions
Connectors:	Analog audio Inputs: 1/8" (3.5mm) mini TRS JACK with screw-down lock; Phones: 3.5mm (1/8") stereo mini jack
Connectors: These are audio or video cables used to connect a camera or videocamera to another source. View All Attribute Definitions
Overall Frequency Response:	20Hz to 22kHz +1/-2dB (IN to PHONES)
Overall Frequency Response: This is used to indicate the accuracy of electronic components or systems, primarily in audio equipment. View All Attribute Definitions
Max. Power Consumption:	0.45W
Max. Power Consumption: Maximum power consumption that a scanner uses. View All Attribute Definitions
Cable Length:	63 in (160cm)
Cable Length: The length of the cable. View All Attribute Definitions
Power:	1 AAA battery (Alkaline battery/ Ni-MH battery / Lithium battery), USB bus power
Power: This is the type of power a device uses. View All Attribute Definitions

Physical Specifications
Dimensions:	2.0 x 2.2 x 1.0" (52.0 x 55.6 x 24.4 mm)
Dimensions: The measurements of an object. View All Attribute Definitions
Weight:	2.2 oz (63 g) including battery; 1.79 oz (51 g) without battery
Weight: The physical weight of the item without packaging. View All Attribute Definitions
Color:	Black
Color: The color of the item. View All Attribute Definitions

Power System
Battery Type:	Lithium x 1 (built in with soldering)
Battery Type: The type of battery for a device. Some cameras use single use alkaline while others use rechargeable lithium batteries. View All Attribute Definitions