Overview

The WR-T10/WR-R10 Wireless Remote Controller units use radio frequencies to communicate; by pairing together a WR-T10 and one or more WR-R10 units. The WR-A10 WR Adapter is designed to work with the WR-R10 Wireless Remote Controller (transceiver), allowing it to be connected to select Nikon D-SLRs with a 10-pin connector, to wirelessly control the shutter release. D-SLRs without a 10-pin connector do not need the adapter.

The WR-R10 and WR-T10 enable remote control over the camera from greater distances and broader angles than are possible with infrared remote controls, and obstacles such as trees between the transceiver and transmitter do not impede communications. Not only autofocus is possible with the shutter-release button pressed halfway but also control over operations such as continuous shooting, movie recording and quiet release mode is possible. Naturally, the WR-T10 can be used to remotely control a single camera to which the WR-R10 is connected, but it can also control multiple cameras to which WR-R10s have been connected. The WR-T10/WR-R10 makes photography much more enjoyable as it enables varied expression of scenes using multiple cameras, each with a different lens mounted, and each shooting the subject from a different angle using the vari-angle monitor.

• Photographers can use the WR-T10 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 unit attached and have been paired with the WR-T10.
• Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location.
• Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement.
• Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet (50 meters).
• One WR-T10 unit can be paired with an unlimited number of cameras with a WR-R10 unit attached.
• When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon Digital Cameras with a 10-pin connector, one camera can be designated as “master” and control the shutter release of up to 64 WR-R10 transceiver units.
• Range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters)

Compatibility

• D600, D7000, D5200, D5100, D3200, D3100, etc., 
• Requires WR-A10 adapter: D4, D3 series, D800 series, D700, D300 series, D-SLR cameras that employ a ten-pin remote terminal or accessory terminal

Product Reviews

In The Box

- Nikon WR-10 Wireless Remote Controller Set
- Nikon WR-T10 (transmitter)
- Nikon WR-R10 (transceiver)
- Nikon WR-A10 (adapter)