• For DJI Mavic 3
• LiPo 4S Battery Chemistry
• 5000mAh Capacity
• Gives up to 46 Minutes of Flight Time

• Compatible with DJI Mini 2/Mini SE
• Provides up to 31 minutes of flight time
• Higher energy density with less weight
• Built-in DJI Intelligent Battery Management System ensures safer flight
  
  
  

• High-energy lithium-ion batteries
• 34 minutes of flight time
• Multiple intelligent battery protection features
• Compatibile with Mavic Air 2

• For DJI FPV Drone
• Intelligent flight battery
• Up to approximately 20 minutes of flight time.
• Built-in intelligent battery management system.

• For DJI FPV Goggles V2

• For Mavic 2 Enterprise / Mavic 2 Enterprise Advanced
• 3850mAh / 59.29Wh Capacity
• Provides up to 31 Minutes of Flight Time
• Four-Cell, High-Capacity LiPo Battery
• Built-In Battery Management System
• Multiple Intelligent Battery Protections
• Self-Heating for Frigid Temperatures

• Compatibility: Matrice 300 RTK
• Hot-swap function
• 55 minutes without load
  

• Compatible with Agras T20 Drone
• Built tough and ready to work
• Recharge easily and quickly
• No battery cooling required
• Lifespan of over 600 charge cycles
• Modular design for easy in easy out, maximizing efficiency
• Capacity: 18000 mAh
• Voltage: 51.8 V
• Discharge Rate: 9 C
• IP Rating: IP54

• Compatible with DJI Mavic 3
• 5.5" Display with 10-Point Multi-Touch
• 1920 x 1080 Resolution
• Outdoor Mode for Better Daylight Viewing
• Dual-Band Wi-Fi 6, 802.11ax, 2 x 2 MIMO
• Bluetooth 5.1 Support
• Mini-HDMI Output to Optional Monitor
• Install Apps via Built-In Browser or APK
• 4 x Customizable Buttons
• 32GB of Storage & microSD Slot

• For DJI FPV Drone
• Revolutionary flying experience.
• Easy and intuitive.

• For DJI FPV Drone

• Parameters can be set remotely.
• Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver.
• 7ms ultra-low latency.

• Parameters can be set remotely
• Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver
• 7ms ultra-low latency

• Compatibility: Matrice 300 RTK
• Ultra-bright 5.5-inch
• 1080p display
• Maintains clear visibility even in direct sunlight
  

• DJI OcuSync transmission system
• HD-quality image and video feed
• Range up to 4.4 miles away

• DJI Remote Controller
• For Inspire 2 quadcopter
• DJI Lightbridge technology
• Operating range of 4.6 miles
• 1080p and 720p video streaming
• 2.4 and 5.8 GHz frequency switching
• Live video broadcast
• Master-slave mode
• Built-in 6000mAh battery
• Color: Silver

• For DJI Phantom 4 Pro+ V2.0
• Built-In 5.5" Full HD 1080p Display
• OcuSync HD Transmission Compatible
• Automatic Switching to Fastest Signal
• Dual 2.4/5.8 GHz Frequency Support
• 4.35-Mile Maximum Range
• 2 x Controllers or Controller + Goggles
• Pre-Installed DJI GO & Social Media Apps
• Automatic & Manual Brightness Adjustment
• Built-In HDMI Port

• For DJI Mavic 2 Series Batteries
• Recharge up to Four Batteries
• Batteries Recharge in Sequence
• DJI Car or Battery Charger Required

• For DJI Mavic 3 Flight Batteries
• Requires 65W Mavic 3 Charger
• Charges up to 3 Batteries in Sequence
• Efficient Charging via Battery Detection

• For DJI Mini 2/Mini SE Flight Batteries
• Charge up to 3 x Batteries in Sequence
• Requires a USB Charger
• Up to 29W Charging

• DJI FPV Battery Charging Hub
• Charge three additional batteries

• Charges a battery in 25 to 35 minutes
• 4-Channel Charger for  Agras T20 and T16
• Input: 110/220 V

• Charge 3 batteries in sequence
• Compact and portable

The Mavic Air 2 Charging Hub does not include a power supply. Please use an official DJI Mavic Air 2 power supply with this device.

• Charge batteries and remote controller simultaneously
• Multiple output interface and modes
• 60 W output power

Mavic 2 Battery Charger does not include the Power Adapter AC Cable.

• Change flight battery into a large-capacity power bank
• Take advantage of the spare battery

• For DJI Matrice 600 Drones
• 2.4/5.8 GHz Transmission Frequency
• Up to 3.1-Mile Transmission Range
• 900 Hz Data Link Frequency
• Master/Slave for 2-Operator Piloting
• Standard and Customizable Buttons
• Built-In 2S 6000mAh LiPo Battery
• Mobile Device Holder Included
• Holder Supports Devices up to 6.7" Wide
• HDMI/SDI/USB Video Output

• Compatible with  Matrice 600 Series
• 8 Knobs and Switches
• Map 8 Channels for Third-Party Modules
• Mapping channels done with DJI Assistant 2 app
• Port Module with USB, CAN and HDMI Ports

• For Phantom 4 Series
• Sequentially Charge Up to 3 Batteries
• Charges Most Full Battery First
• Storage Mode Maintains 50% Charge

• Removable design for easy storage

• Professional monitor mounting kit
• Compatibility: Matrice 300 RTK

• Ryze Tech Battery
• For DJI Tello drone
• Power capacity of 4.2 Wh
• Color: Black

• Up to 30 Minutes of Flight Time
• Intelligent Communication
• Calculates Remaining Flight Time
• Advanced Minimum Capacity Warning
• Overcharge/Over-Drain Protection
• Auto-Discharge for Long-Term Storage

• DJI TB50 intelligent flight battery
• For Inspire 2 quadcopter
• 22.8 V/ 4280 mAh
• Built-in 70W self-heating system
• Color: Black

• 4500mAh Capacity
• Lithium-Ion Polymer (LiPo) Battery, 22.2V
• Yields Flight Times up to 30 Minutes

• For Matrice 600 Hexacopters
• Relays Remaining Battery Power
• Provides Data About Cell Voltage
• 5700mAh Battery, 22.8V

• Remotely Operate DJI Ronin 2 Stabilizer
• Switch Operating Modes and Profiles
• Dedicated Tuning Knobs for Each Axis
• 2.4 and 5.8 GHz Frequency Operation
• Remote Camera Start/Stop Control

• Matrice 600 Part 11
• Black Remote Control
• Works with Lightbridge 2

• Provides up to 5 analog control channels
• Over 10 customizable buttons
• Antenna interchangeability
• HDMI, SDI, USB, and CAN ports.
• Comes with the fully integrated Cendence Monitor Mounting Bracket.